Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Air Duct Repair Across Dallas
Air duct repair in Dallas most often comes down to one thing: flex duct that was installed during the 2000s housing boom has now outlived its rated lifespan. We replace sagging, torn, and collapsed supply runs throughout Dallas subdivisions every week. If you’ve noticed weak airflow from certain registers or a gray film settling on furniture, the problem is usually inside the ductwork, not the HVAC unit itself. Call (912) 405-8840 and we’ll schedule a camera inspection, give you a written price before any work starts, and send a background-checked technician whose name and photo arrive before the visit.
Why Linden Air Duct Marietta Is Dallas’s Preferred Air Duct Repair Company
Dallas homeowners call us because we show up the way we said we would. Every technician who walks through your door is background-checked, identity-verified, and photo-badged under The Threshold Standard. You’ll know who is coming before they arrive, and they’ll show a photo ID at the door. That matters when you’re home alone or have young kids in the house.
Our crews regularly work in Seven Hills, The Georgian, and subdivisions along Cedarcrest Road and Macland Road. We know these homes. We know the slab-on-grade construction, the hallway returns, and the builder-grade flex duct that runs through them. Dispatch is coordinated from the brand’s Atlanta office, so scheduling is straightforward, and a live person answers the phone 24/7. No voicemail loops when you call about a repair that cannot wait.
Marcus Veale leads our team, and he holds every job to a simple standard: the written price you approve before we start is the price you pay. Every repair carries a written 365-day guarantee. If the repair fails within that window, we return at no charge. That’s the Linden position, and it’s been the position since 2004.
Styles & brands we work with
Ductwork Installation in Dallas
Ductwork installation in Dallas typically involves replacing failed flex duct runs in existing homes rather than new-build installs. When a supply run sags, tears, or collapses, patching is often a temporary fix on a component that has already reached the end of its 15 to 20 year service life. We replace the damaged section, reseal every connection to NADCA standards, and verify airflow at each register before we leave. A straightforward single-run replacement in a Dallas home generally runs $350 to $800 depending on run length and attic accessibility. A full supply-side replacement in a 2,500 sq ft home ranges from $2,800 to $5,200.
Why Replacement Beats Patching Here
Flex duct in Dallas slabs and attics fails in predictable ways. The inner liner tears, the outer vapor barrier separates, and the duct sags between supports. Patching one tear usually means the next weak point fails a few months later. If the duct is original to a home built between 2000 and 2010, replacement is the honest recommendation.
What to Expect During the Job
We access the attic or chase, remove the damaged run, and install new flex duct properly supported every four feet. Connections get sealed with mastic and UL-rated tape, not duct tape. You’ll receive before-and-after photos of your own ductwork, so you can see exactly what was replaced.
HVAC Duct Installation in Dallas
HVAC duct installation in Dallas differs from simple repair because it involves sizing and configuring the entire duct system to work with the existing equipment. We see this most often in Dallas homes where an HVAC unit was replaced but the original builder-grade ductwork was left in place. Mismatched components create static pressure problems, noisy registers, and rooms that never reach temperature. A partial HVAC duct installation, replacing the trunk line and major branches, typically runs $3,500 to $6,800 in Dallas. A complete system install in a 3,000 sq ft home ranges from $7,000 to $12,000.
Builders’ Leftover Debris
New construction in Dallas subdivisions often leaves drywall dust and construction debris inside the ducts at handover. Builders rarely clean the system before closing. That dust recirculates for months until owners notice a gray film on registers and furniture. If we’re installing new ductwork, we run a HEPA-filtered negative-pressure extraction afterward to remove every bit of debris before the system runs again.
Correcting Airflow Imbalances
Many Dallas homes have rooms that run hot in summer because the original duct design did not account for solar load or long runs. During a duct installation, we correct those imbalances with properly sized branches and balanced dampers. The result is even temperatures and a quieter system.
Trusted Brands We Service in Dallas
We service duct systems built with equipment from Nikro, Honeywell, Aprilaire, and Abatement Technologies. Dallas customers often ask whether our repair process is compatible with the air-quality products they already have installed. The answer is yes. Our techs stock common connectors, mastic, and hangers for these systems on the truck, so most repairs are completed in a single visit. If your system includes an Aprilaire filter cabinet or a Honeywell media filter, we work around it without disrupting the housing or the seal. That means less downtime and no compromise to your indoor air quality.
Common Air Duct Repair Problems We See in Dallas Homes
- Sagging and torn flex duct. Homes built during the post-2005 Dallas building boom used flex duct rated for 15 to 20 years. Many of those runs are now past that window, sagging between supports and tearing at junctions in slab-on-grade homes.
- Construction debris in new ducts. Builders’ leftover drywall dust sits in supply runs from the day you close. New homeowners in Seven Hills and other Dallas subdivisions often notice gray dust on furniture within the first year because no one cleaned the ducts before handover.
- Hallway return contamination. Dallas floor plans from the 2000s frequently place return ducts in high-traffic hallways. That design pulls in pet hair, dust, and debris faster than older nearby towns like Hiram or Powder Springs, clogging blower motors and reducing system life.
- Attic insulation pulled into the airstream. When flex duct tears at a junction near a hallway return, the negative pressure can pull loose attic insulation directly into the supply air. That is a health and efficiency problem we correct with new duct, proper sealing, and a full system clean.
See the difference
Before
After
Before
After
Before
AfterPricing for Air Duct Repair in Dallas, GA
A typical air duct repair in Dallas runs $350 to $800 for a single damaged run replacement, while larger repairs involving multiple runs or trunk line work range from $1,200 to $3,000. Full duct replacement in a 2,000 to 3,500 sq ft Dallas home spans $3,500 to $12,000 depending on system size and attic accessibility. What changes the price is access. Attics with tight clearances, long runs through chases, and slab foundations with no crawlspace all add labor time. You will never see a per-vent price from us, and you will never get a teaser quote that becomes a much larger invoice once the work begins. The price we put in writing before starting is the price you pay. Call (912) 405-8840 for a free estimate with exact numbers for your home.
We Also Serve Cities Near Dallas
Our Air Duct Repair crews cover the full Dallas area, including Powder Springs, Austell, Mableton, and Kennesaw. If you live just outside Dallas, the same written-price and 365-day guarantee applies. Our Dallas team schedules throughout Paulding and Cobb counties with the same background-checked technicians and the same NADCA-compliant process.
Serving Dallas, GA - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Air Duct Repair in Dallas
Builders in Dallas subdivisions routinely leave drywall dust, sawdust, and debris inside the flex duct runs at handover. That debris recirculates through the system for months. More importantly, builder-grade flex duct is often poorly supported or already nicked during construction. We commonly replace damaged runs in homes less than five years old because the builder’s install did not meet NADCA standards. Call (912) 405-8840 and we will inspect what is actually inside your ducts.
Yes. In almost all Dallas slab-on-grade homes, the flex duct runs through the attic or through ceiling chases, not under the concrete. The sagging or torn section is accessed from above, replaced, and resealed without cutting into the slab. We only encounter under-slab duct in a small percentage of older homes, and even then, repairs are typically done from the register openings rather than breaking concrete.
Dallas homes built between 2000 and 2010 often locate the main return in a central hallway with heavy foot traffic. That placement pulls in far more dust, pet hair, and debris than a return located in a quieter area, so the blower motor, filter, and duct lining accumulate contamination faster. Repairs to these systems frequently include a thorough return-side cleaning to prevent the new ductwork from immediately re-contaminating. We address the entire path, not just the visible damage.
After a duct repair in Dallas, we recommend a MERV 11 or MERV 13 filter, provided your HVAC system is designed to handle the additional static pressure. Dallas’s humid subtropical climate means high pollen counts in spring and heavy AC use through summer. A MERV 11 filter captures most pollen and pet dander without straining the blower motor. We do not recommend MERV 13 or higher on systems without a specifically designed media cabinet, such as those from Aprilaire or Honeywell, because the pressure drop can reduce airflow and reintroduce the same problems we just repaired.
Usually, yes. When a section of flex duct tears or collapses in a Dallas home, the breach often pulls attic insulation, drywall dust, or construction debris into the airstream. Replacing the damaged run without clearing that contamination means the new duct starts dirty from the first cycle. Our standard approach is to repair the damage first, then run a HEPA-filtered negative-pressure extraction through the full system to remove the debris. You get one job, one price, and the system is actually clean when we leave. Call (912) 405-8840 and we will explain exactly what your system needs.
Serving Dallas Since Day One of Every Problem
Last spring, our crew was called to a 2,700 sq ft home in the Seven Hills subdivision after the owners noticed weak airflow from every register. A camera inspection of the supply ducts showed a 12-foot section of flex duct that had sagged and torn at a junction above the hallway return, pulling drywall dust and attic insulation into the airstream. We replaced the damaged run, resealed the connections to NADCA standards, and ran our HEPA-filtered negative pressure system to clear the remaining debris. Airflow returned to spec that afternoon.
That failure pattern is common across Dallas, and it’s why we answer the phone with a live person, put every price in writing, and stand behind every repair for 365 days. If the repair does not hold, we come back at no charge. That’s the written guarantee on every job. Call (912) 405-8840 for a free estimate and a straight answer about your ductwork.
Written by Marcus Veale, Owner at Linden Air Duct Marietta, serving Dallas since 2004.